Bruna Parede, Height 22in Projection 19in Wall Fan

Bruna Parede, Height 22in Projection 19in Wall Fan
The blades of the Bruna Parede Wall Mounted Fan can be infinitely positioned vertically and horizontally across 180-degree arcs to provide maximum directional airflow. It can be mounted in small, awkward spaces or in front of hvac ducts to make more efficient the heating, ventilation or air conditioning of any room. The Bruna is available in polished chrome, brushed nickel, polished copper, bronze or black. White, brushed copper, polished brass, brushed brass, black nickel and bronzette are available as special orders. Bronzette, incidentally, is our monochromatic powdercoated bronze finish.

Constructed of cast aluminum, heavy gauge spun and stamped steel, the Michelle is UL Listed and carries a limited lifetime warranty. All metal bladed fans are damp location rated if ordered with protective powder or clear coatings.

Safety laboratory listings: All Ceiling and Wall Fans are CUL listed for damp location provided that metal blades are used and that fan has special protective clear or powder coatings. Underwriters laboratories suggests that Matthews Fan safety cage/metal blade combination be used with our fans when mounted in rooms with ceiling heights of less than 10.0 ft. in the U.S., if safety cages are used, our fans can be mounted on Ceilings or Walls with ceiling heights as low as 7.0 ft. in Canada, if safety cages are used, our fans can be mounted on Ceilings or Walls with ceiling heights as low as 8.3 ft/2.5 m. Finishes: Standard (stock) - brushed nickel, polished chrome, polished copper, bronze (plated) and black; special (non-stock) - brushed copper, polished brass, brushed brass, white, bronzette (powder coat) and black nickel. Downrods for Ceiling Fans: All Matthews Ceiling Fans are equipped with at no charge one field-cuttable down rod of 5, 10, 20 or 30,” and one ceiling mounting apparatus (for a flat or vaulted ceiling). Only if 48” or 72” downrods, upgrades or replacement parts are ordered will charges apply for this otherwise no charge equipment. If not otherwise specified, standard equipment is a 20” down rod and a flat ceiling mounting apparatus. Wall Controls: Matthews Fans require fully variable wall controls for optimum regulation. Remote controls and three speed (high-medium low) controls will not function with our products. The three acceptable UL compatible controls are: Decora switch plate: lutron skylark white (sfs5e designer slide) 5.0 amp – x2 wires ( x1 hot / x1 neutral); decora switch plate: lutron skylark white (s2lf designer dual slide) 3.0 amp fan and light control – x3 wires (x2 hot / x1 neutral the light kit and fan are each on separate circuits); standard switch plate: lutron white (fs5e retro rotary) 5.0 amp.